Avalon Tec Damper 21mm Diameter: 29mm (base 22mm) Thread: 1/4" Reduces noise and vibration easy to install Threads on any stabilizer with 1/4" ends
Stabilizer tungsten weights from Avalon.Weights: 1, 2, 3, 6 oz. (28 g, 56 g, 85 g, 170 g)Diameter: 32 mmThickness: 1 oz.: 2 mm 2 oz.: 4 mm 3 oz.: 6 mm 6 oz.: 12 mm Thread: UNC 1/4"Material: Tungsten
Fivics Adapter screw 5/16- 1/4
The Fivics CEX-2000 End weights have been designed to help grip the floor when the bow is rested on a bow stand without compromising the cosmetic fashionable. Available from 30g to 180g whit a 1/4 UNC screw.
The Fivics weights have been designed to help grip the floor when the bow is rested on a bow stand without compromising the cosmetic fashionable.
Quick Disconnect with 10° down angle from FivicsProperties: Quick disconnect angled 10° Two fixing screws included: 15 mm for direct attachment to the bow 30 mm attaching through a V-bar Material: aluminium, black anodised Diameter: 24 mm Weight: 38 g (incl. short fixing screw)
Fivics DC1500 Damper is the upgrade of old VZ2000. It issuitable for all stabilization for both Recurve that for Compound and absorbs vibration and dampens noise of stabilization.
Fivics FVW 501 Sight Damper• Sight damper to take vibration out of your sight• Mounts to aperture threads• Weighted for added stabilization
Fivics FVW 502 Sight Bar Damper• Sight Bar damper to take vibration out of your sight• Mounts to aperture threads• Weighted for added stabilizationIdeal for FV 150 and 300 Set 2 pcs.
Flat weights for 1500D stabilizers 1 level Weight: 1.3 oz. 2 level Weight: 2.6 oz. 4 level Weight: 5.2 oz.
Fivics PX1500 Damper Upstabilizer • Damper works great for taking vibrations out of the shot• Can be mounted in upper or lower limb mounting holes• Significantly reduces vibration felt in the riser• 5/16 x 24 threads
RISER DAMPERS TEC X MODULATE 1.5" DAMPER 5/16" ANODIZED
X10' DISK WEIGHT SCREW 12mm 'X10' DISK WEIGHT SCREW 19mm'X10' DISK WEIGHT SCREW 25mm
Sanlida X10 Disk Weight System Stainless steel disk weight system designed for use with the Sanlida Team 700 and Team 700 ES series stabilizers but can be used with other brands. Single: 28g - 5mm x 30mmDouble: 56g - 10mm x 30mmTriple: 84g - 15mm x 30mmQuadruple: 112g - 20mm x 30mm
Stainless Steel Stabilizer Weights• 1/4x20 Threads• Available Models:Flat (1 oz.)Small Cap (.77 oz.)
INTERMEDIATE WEIGHTS STABILIZERS FLAT WEIGHT 19MM / 45GR